REGISTERING A HANDSET
Once a handset has been registered, the handset number will be displayed on the right
of the LCD display.
To register the handset:
1. Press right key to enter the menu.
2. Press up /down key to select HS Setting.
3. Press right key to confirm. Register HS is displayed.
4. Press and hold the register button on the base, until the registration indicator lights
up(>10s).
5. While Register HS is displayed, press right key to confirm. Then enter the PIN
code “0000” (default). , press right key to confirm. Please Wait is displayed as
the handset searches for the base.
6. After 5 to 10 seconds, the handset number will appear in the upper right corner of
the LCD display. Registration is complete.
7. If ? is displayed, it means registration was not successful.
8. To register the other handsets, follow steps 1 to 6.
DELETE A HANDSET
1. Press right key to enter the menu.
2. Press up /down key to select Base Setting.
3. Press right key to confirm. Delete HS will be displayed.
4. Press right key to confirm.
5. Delete HS 101 is displayed.
6. Press up /down key to select the handset number you would like to delete (for
example, 101 to 115; the number of handset numbers may be different for each
base).
7. Press right key
to confirm. Delete HS is displayed again.
8. Press left key repeatedly to return to the standby mode, or press end key to
exit.
LINE SELECT FUNCTION
1. Select line 1, use handset to press L key, press 1, (LCD display Line 1) then call
key and enter the phone number.
2. Select line 2, use handset to press L key, press 2, (LCD display Line 2) then call
key and enter the phone number.
3. Select line 3, use handset to press L key, press 3, (LCD display Line 3) then call
key and enter the phone number.
4. Select line 4, use handset to press L key, press 4, (LCD display Line 4) then call
key and enter the phone number.
example: In the standby mode, handset press L key, press 2 key(handset LCD display
Line 2), press call key and enter the phone number (0968123456), then you
can use line 2 to talk, after conversation, press end key to end the call.
32
To Next Page
Loading...
