Alcatel XPS4010+ - Handset REDIAL Key Function; Handset R Key Function; Restoring Handset to Factory Default; Base Station Setting

Handset REDIAL Key Function
In standby mode, press REDIAL key, the last dialed phone number will be displayed.
Press call key to dial the last dialed phone number.
Handset R Key Function
In standby mode, long press R key for 3 seconds can enter language setting. During an
external call, R key is the flash function. (You have to contact your local phone service
provider to activate this function.)
Restoring Handset to Factory Default
1. Press right key to enter the menu.
2. Press up /down key to select HS Setting.
3. Press right key to confirm.
4. Press up
/down key to select Reset HS.
5. Press right key
to confirm.
6. Press key number 1 to confirm, or key number 2 to abort.
7. Press left key repeatedly to return to the standby mode, or press end key to
exit.
BASE STATION SETTINGS
Time and Date
1. Press right key to enter the menu.
2. Press up /down key to select Base Setting.
3. Press right key to confirm.
4. Press up /down key to select Set Time.
5. Press right key to confirm. The time and date formats will be displayed,
MM/DD/YYYY and DD/MM/YYYY (24 hour).
6. Press up
/down key to select. Press right key to confirm. Enter in the
following order: month(or date), date(or month), year, hour, minute. If the entered
number does not match the required item, you will hear a long beep.
7. Press right key
to confirm.
8. Press left key repeatedly to return to the standby mode, or press end key to
exit.
Restoring Base to Factory Default
1. Press right key to enter the menu.
2. Press up /down key to select Base Setting.
3. Press right key to confirm.
4. Press up /down key to select Reset Base.
5. Press right key to confirm.
6. Press key number 1 to confirm, or key number 2 to abort.
7. Press left key repeatedly to return to the standby mode, or press end key to
exit.
35