Alcatel XPS4010+ - Call Waiting Tone; Voice Announce Function

Call Waiting Tone
When there is an incoming call from an external line during a call in progress, the base
will send a series of short beeps to the handsets in use. Use this function to turn the call
waiting tone on or off.
1. Press right key to enter the menu.
2. Press up /down key to select Base Setting.
3. Press right key to confirm.
4. Press up /down key to select Call Waiting.
5. Press right key to confirm. OFF will be displayed, indicating the call waiting tone
is turned off. Press up /down key to turn the call waiting tone on or off.
6. Press right key to confirm.
7. Press end key to exit.
VOICE ANNOUNCE FUNCTION (DISA)
1. Press right key to enter the menu.
2. Press up /down key to select Base Setting.
3. Press right key to confirm.
4. Press up /down key to select DISA Setting. Press right key to confirm.
5. Handset will display Please wait, and then display ON.
6. Press up /down key to ON/OFF the voice announce function. Press right key
to confirm.
7. Press left key repeatedly to return to the standby mode, or press end key to
exit.
When finish the DISA Setting, you have to reset the base power.
If you turn off DISA function, all handset will ring when there is an incoming call.
36