Additional Safety Rules for Petrol Products
f. Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier
to control.
g. Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working
conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous
situation.
• Donotoperateinahazardouslocation.Suchareasincludewhere
there is a risk of explosion of petrol fumes, leaking gas or
explosive dust.
• Donotoperateinaconnedarea.Exhaustgases,smokeorfumes
could reach dangerous concentrations.
• Protectyourproduct.ThisLineTrimmerisNOTWEATHERPROOFand
should not be exposed to direct sunlight, high ambient temperature
and damp, wet or high humidity conditions.
• Donotsmokewhilerefuelling.Thisispotentiallydangerousasitmay
ignite the fuel and cause an explosion.
• Takecarenottospillfueloroil.WhenrefuellingtheLineTrimmer
ensure that the motor has been switched off. Prevent the spilling of
fuel as this may also ignite with the hot motor.
Never refuel whilst the engine running.
• Checkforfuelleaks.Donotoperateifafuelleakisdetected.Wherea
fuel leak is detected, drain the tank of fuel and have the leak repaired.
• BecarefulwhereyoustoretheLineTrimmer.StoretheLineTrimmerin
a dry area away from flammable liquids.
• Keepyourdistance.TheLineTrimmeremitsexhaustfumes.
Ensure bystanders keep a safe distance.
• Neverllfueltankindoors.
•Weargoggles
•Wearearmus
•Wearabreathingmask
6