42 Modes of the Ski watch
42
To start the search for satellites, the following options are
available:
1) As soon as you switch the Ski watch into a training mode,
the watch starts to search for GPS signal for about 10
minutes.
2) Press and hold the “VIEW” button for 2 seconds in the
GPS training mode.
As soon as the GPS signal has been received, the following
symbol will be stable on the display:
The following symbol for GPS receipt will be shown for some
seconds on the display:
Switch off GPS manually
To turn off the search for satellites or the GPS signal
manually, press the “VIEW” button for 2 seconds in the
training modes.
Start/stop training in the Training Modes Skiing, Running
or Cycling
Press the “MODE” button until you enter one of the Training
Modes. In this way, the search for a GPS signal and the heart
rate measurement will be automatically activated.
To Next Page
Loading...
