TM3Service@outlook.com
USA
877 368 8246
13. Use the On/Off switch to switch the shaver off with-
out the shaver head for approx. 5 – 10 seconds in or-
der to dispel water drops from the shaver blades
4
.
14. Use a lint-free cloth or a paper towel to thoroughly
dry off the shaver.
15. Firmly mount the shaver head
2
on the shaver so
that the locking mechanism locks into place (see fig. F).
16. Place the protective cap
1
on the shaver.
The shaver is now ready for use again.
User maintenance for the shaving foils
To maintain the performance of your shaver and in-
crease the service life of the shaving foils, you should
perform user maintenance on the shaving foils every
two months as follows:
1. Put a drop of fine, non-resinous household oil on
the tip of your finger.
2. Distribute the oil evenly on the shaving foils.
3. Without applying pressure, dab the shaving foils
with a soft, lint-free cloth or paper towel.
Replacing wearable parts
Ordering wearable parts
You can order a new shaving foil unit and shaver blades
to replace worn ones.
To place your order, contact the address provided on
the order form.
To Next Page
Loading...
Need help?
General
