11
General information
General information
Reading and storing the user manual
These operating instructions are a part of this table saw.
They contain information of importance for your safety, for
the use of the product and for its care.
Read the operating instructions carefully before you start using
the table saw. Take special care to observe the safety information
and warnings. Failure to follow the instructions in these operating
instructions could lead to serious injuries or damage to the table
saw.
Observe all applicable local and national regulations relating to the
use of this product. Keep these operating instructions in a safe place
for later reference. If you pass the table saw on to any other person,
it is essential that you also pass these operating instructions on to
them with it.
Explanation of symbols
The following symbols and signal words are used in these operating
instructions, on the table saw or on the packaging.
This indicates a dangerous situation which,
if not avoided, will result in death or
seriousinjuries.
This indicates a dangerous situation which,
if not avoided, could result in death or
seriousinjuries.
Warns of possible damage to property.
Layout_F_TS_2000_1_UK_SPK7.indd 11Layout_F_TS_2000_1_UK_SPK7.indd 11 23.06.2020 14:29:3523.06.2020 14:29:35