29
Using for the first time
40. Have your tool repaired only by trained personnel using only
genuine spare parts. This will ensure that your tool remains safe
to use.
41. All covers and safety devices have to be properly fitted before the
equipment is switched on.
42. When working with wood that has been processed before, watch
out for foreign bodies such as nails or screws etc.
43. Before you actuate the On/Off switch, make sure that the saw
blade is correctly fitted and that the equipment’s moving parts
run smoothly.
44. Keep handles dry, clean and free from oil and grease.
Keep this safety information in a safe place!
Using for the first time
Checking the table saw and items supplied
Risk of damage!
If you open the packaging without care using a sharp knife or other
pointed objects, this could quickly cause damage to the table saw.
• Open the packaging and take out the equipment with care.
• Remove the packaging material and any packaging and/or
transportation braces (if present).
• Check to see if all the items are supplied.
• Inspect the equipment and accessories for transport damage.
• If possible, keep the packaging until the end of the guarantee
period.
• Check that the equipment after unpacking to ensure that it is
complete and check it for damage which may have occurred in
Layout_F_TS_2000_1_UK_SPK7.indd 29Layout_F_TS_2000_1_UK_SPK7.indd 29 23.06.2020 14:29:3623.06.2020 14:29:36
To Next Page
Loading...
Need help?
General
