28
Safety
27. Be sure to observe the safety information and operating and
maintenance instructions issued by the manufacturer, as well as
the dimensions listed in the Technical Data.
28. It is imperative to observe the accident prevention regulations in
force in your area as well as all other generally recognized rules of
safety.
29. Note the information published by your professional associations.
30. Operators must be at least 18 years of age.
31. Never remove loose splinters, chips or jammed pieces of wood
when the saw blade is running.
32. To rectify faults or remove jammed pieces of wood, always switch
off the machine first. – Pull out the power plug –
33. Persons working on the machine should not be distracted.
34. Keep your workplace clean of wood scrap and any unnecessary
objects.
35. Before you use the machine for the first time, check that the
voltage marked on the rating plate is the same as your supply
voltage.
36. Check the power cable. Never use a faulty or damaged power
cable.
37. Operate the saw only with a suitable vacuum extraction system
or a standard industrial vacuum cleaner.
38. Keep unused electric tools out of the reach of children. Do not
allow people who are not familiar with the tool or who have
not read these instructions to use the tool. Electric tools are
dangerous if they are used by inexperienced people.
39. Keep your cutting tools sharp and clean. Carefully maintained
cutting tools with sharp cutting edges will jam less and are easier
to control.
Layout_F_TS_2000_1_UK_SPK7.indd 28Layout_F_TS_2000_1_UK_SPK7.indd 28 23.06.2020 14:29:3623.06.2020 14:29:36
To Next Page
Loading...
Need help?
General
