ALDI FERREX F-TS 2000-1 User Manual

46
Cleaning and maintenance
9. Wipe the table saw with a clean cloth or blow it down with
compressed air at low pressure. Wear safety goggles when using
compressed air.
10. In cases of stubborn dirt, use a damp cloth and a little soft soap.
Carbon brushes
In case of excessive sparking, have the carbon brushes checked by a
qualified electrician.
The carbon brushes should not be replaced by anyone but a
qualified electrician.
Maintenance
Risk of injury!
There is a risk of serious injuries if the table saw is handled
improperly.
• Switch off the table saw and pull the power plug out of the socket
before you start any maintenance work.
• Wear suitable protective gloves when carrying out work on the
table saw.
• There are no parts inside this table saw which can be repaired by
the user. Never try to repair the table saw yourself. Always contact
a qualified expert.
Layout_F_TS_2000_1_UK_SPK7.indd 46Layout_F_TS_2000_1_UK_SPK7.indd 46 23.06.2020 14:29:3723.06.2020 14:29:37

ALDI FERREX F-TS 2000-1 Specifications

General

Brand	ALDI
Model	FERREX F-TS 2000-1
Category	Saw
Language	English