ALDI md15694 User Manual

17
AFTER SALES SUPPORT
Preparatory work
GB
0333 32 13 106
IRE
1 800 992508
www.medion.co.uk
GB IRE
 Put the end of the thread through the bobbin hole as illustrated and
wind the thread around the bobbin a few times by hand.
 Place the bobbin on the bobbin spindle
5
, with the side of the
bobbin containing the end of the thread facing upwards. Move the
bobbin spindle
5
to the right towards the winding stop
6
until it
audibly clicks into place.
After the bobbin spindle has clicked into place on the right, the LED
display changes from the programme number to the ][ symbol. At the
same time, the sewing mechanism is turned off so that the needle does
not move during spooling.
 Hold onto the end of the thread and press the foot pedal. Once some
thread has been wound onto the bobbin, let go of the end of the
thread. Wind thread onto the bobbin until the bobbin spindle
5
automatically stops.
 Move the bobbin spindle
5
to the left and remove the bobbin.
 Cut off the protruding threads.
The LED display changes back from the ][ symbol to the programme
number display
51
and the sewing mechanism is reactivated.
Removing the bobbin
 Raise the needle and the presser foot to their highest positions by
turning the hand wheel
26
.
 Open the bobbin cartridge by pushing the release slider to the right.
 Remove the bobbin cartridge cover
13
.
 Now carefully lift the bobbin from the bobbin cartridge.
15694 EN ALDI UK_IRE Content MSN 5005 3188 final.indd 1715694 EN ALDI UK_IRE Content MSN 5005 3188 final.indd 17 12.05.2016 07:00:2012.05.2016 07:00:20

ALDI md15694 Specifications

General

Brand	ALDI
Model	md15694
Category	Sewing Machine
Language	English