ALDI md15694 - Maintenance and Cleaning - Needle Care; Changing the Needle

40
AFTER SALES SUPPORT
Maintenance and cleaning
GB IRE
GB
0333 32 13 106
IRE
1 800 992508
www.medion.co.uk
Maintenance and cleaning
CAUTION!
Risk of injury!
Inadvertent operation of the foot pedal can lead to a risk of
injury.
− Once you have fi nished working or before you start
maintenance, always turn off and unplug the machine.
Changing the needle
 Turn the hand wheel
26
towards you until the needle has reached
its top position.
 Loosen the needle clamp screw
28
by turning it towards you.
 Remove the needle from the needle holder.
 Insert a new needle with the fl at side facing backwards. Push the
needle upwards until it can go no further.
 Tighten the needle clamp screw
28
again.
Tighten
Needle holding
screw
Flat side
towards
the back
Needle rod
Loosen
Needles are available from specialist retailers.
You will fi nd information on types and thickness in section „Fabric,
thread and needle table“ on page 45.
15694 EN ALDI UK_IRE Content MSN 5005 3188 final.indd 4015694 EN ALDI UK_IRE Content MSN 5005 3188 final.indd 40 12.05.2016 07:00:2812.05.2016 07:00:28