23
AFTER SALES SUPPORT
Preparatory work
GB
0333 32 13 106
IRE
1 800 992508
www.medion.co.uk
GB IRE
Move the lever
36
of the threader carefully back to its starting
position. The thread hook A pulls the upper thread through the eye
of the needle and creates a loop behind the needle.
Push the lever
36
of the threader back up again and pull the loop
completely through the eye of the needle by hand to completely
thread the upper thread.
Bringing up the lower thread
Move the presser foot
32
to the upper position. Turn the hand
wheel
26
towards you with your right hand until the needle is in
the upper position.
Hold the upper thread loosely with your left hand and turn the hand
wheel
26
towards you with your right hand until the needle has
moved down and back up again.
Stop turning the hand wheel
26
as soon as the needle has reached
its highest position.
Pull the upper thread upwards slightly so that the lower thread
forms a loop.
Pull around 15cm of both threads out and back from under the
presser foot
32
.
15694 EN ALDI UK_IRE Content MSN 5005 3188 final.indd 2315694 EN ALDI UK_IRE Content MSN 5005 3188 final.indd 23 12.05.2016 07:00:2212.05.2016 07:00:22