28
AFTER SALES SUPPORT
Sewing
GB IRE
GB
0333 32 13 106
IRE
1 800 992508
www.medion.co.uk
Programme selection
On this sewing machine, you can select a number of different functional
and decorative stitches. You can use the programme selection buttons
38
to easily select the stitch pattern you want.
Before changing the stitch, always make sure that the needle is at its
highest position.
Use the
and buttons to set the desired pattern.
If you hold down the programme selection buttons
38
for about 5
seconds, the programme numbers will scroll through in steps of ten.
When you reach the desired programme range, simply release the
buttons.
You will fi nd an overview of all of the stitch types on the operating panel
or in section „Programme selection“ on page 46.
Stitch width setting
You use the stitch width setting
40
to set the width of the stitch type
you selected.
Press the - button to reduce the stitch width or the + button to
increase the stitch width.
The default stitch width is indicated on the display by the
symbol
48
. If you change the default stitch width, the oval around the stitch width
symbol goes out.
If you hear a warning beep when setting the stitch width, you have
reached either the minimum or the maximum stitch width.
Setting the stitch length
You use the stitch length setting
39
to set the length of the stitch type
you selected.
Press the - button to reduce the stitch length or the + button to
increase the stitch length.
The default stitch length is indicated on the display by the
symbol
45
. If you change the default stitch length, the oval around the stitch
length symbol
goes out.
If you hear a warning beep when setting the stitch length, you have
reached either the minimum or the maximum stitch length.
Increase
programme number
Decrease
programme number
Stitch width
setting buttons
Stitch length
setting buttons
15694 EN ALDI UK_IRE Content MSN 5005 3188 final.indd 2815694 EN ALDI UK_IRE Content MSN 5005 3188 final.indd 28 12.05.2016 07:00:2412.05.2016 07:00:24
To Next Page
Loading...
