18
AFTER SALES SUPPORT
Preparatory work
GB IRE
GB
0333 32 13 106
IRE
1 800 992508
www.medion.co.uk
Inserting the bobbin
Hold the bobbin between the thumb and index fi nger and leave
about 15 cm of the thread hanging out.
Place the bobbin carefully into the bobbin cartridge so that the
thread is wound down from the bobbin and the bobbin turns
anticlockwise if you pull on the thread.
Now pass the thread from right to left into the tensioning spring (slot
A).
Now pull the thread through the notch B out and over the bobbin.
Leave around 15cm of thread hanging out.
Hold the end of the thread and close the bobbin cartridge cover
13
by fi rst placing the cover on the left side and then pressing down
until it clicks into place.
15694 EN ALDI UK_IRE Content MSN 5005 3188 final.indd 1815694 EN ALDI UK_IRE Content MSN 5005 3188 final.indd 18 12.05.2016 07:00:2012.05.2016 07:00:20
To Next Page
Loading...
Need help?
General
