ALDI md15694 - Maintenance and Cleaning - Feeder and Bobbin Housing; Feeder and Bobbin Housing Care

42
AFTER SALES SUPPORT
Maintenance and cleaning
GB IRE
GB
0333 32 13 106
IRE
1 800 992508
www.medion.co.uk
Cleaning and oiling the feeder and the bobbin housing.
It is necessary to keep the fabric feeder teeth clean at all times to ensure
perfect stitching.
 Remove the needle and presser foot (see Page 40 f.).
 Remove the screws on the needle plate
10
to remove the needle
plate from the machine.
 Now lift the bobbin from the bobbin cartridge.
 Remove the shuttle track ring.
 Use the brush to remove dust and thread residues from the fabric
feeder teeth, the bobbin cartridge and the shuttle track ring.
 Lubricate the places marked with an arrow with a drop of sewing
machine oil.
 Replace the shuttle track ring in the bobbin cartridge. When
inserting, make sure the fi xing lip B is at the end position of the
shuttle ring A.
 Replace the needle plate
10
.
TIP
This part of the machine may need to be oiled more frequently,
depending on how often you use the machine.
B
A
15694 EN ALDI UK_IRE Content MSN 5005 3188 final.indd 4215694 EN ALDI UK_IRE Content MSN 5005 3188 final.indd 42 12.05.2016 07:00:2912.05.2016 07:00:29