• Operation or maintenance of the saw by persons not familiar with how to handle
the saw and/or who are not aware of the related risks.
Residual risks
The user manual for this saw contains exclusive notes on how to safely work with it.
However, every power tool carries certain residual risks, which existing protective
devices are unable to rule out completely.
The following risks may occur for example:
• Touching moving parts or fitted tools;
• Touching the rotating saw blade (cut injury);
• Kickback of the work piece and parts of the work piece if used improperly;
• Injury caused by projected work pieces or parts of work pieces;
• Fire hazard if the motor is not sufficiently ventilated;
• Injury to hearing if work is performed without ear protection;
• Emission of wood dust that is harmful to health if used in enclosed spaces.
General power tool safety instructions
WARNING Read all safety instructions and instructions.
Failure to follow the safety instructions and instructions may result in an elec-
tric shock, fire and/or severe injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool:
Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite
accidents.
b) Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power
tool.
Distractions can cause you to lose control.
To Next Page
Loading...
