GB
IRE
0044 151 649 1500
0044 1890 946 244
GB IRE
Checking the table saw
Regularly check the condition of the table saw.
Among other things, check to make sure:
− that the switches are not damaged,
− that the accessories are in proper condition,
− that the mains connection line and the mains plug are not damaged,
− that the vents are unobstructed and clean. If applicable, use a soft brush to clean
them.
If you identify any damage, you must have it repaired by a specialist
workshop to prevent risks.
Storage
1. Clean the table saw as described in the chapter “Cleaning” before storage.
2. Store the table saw in a dry place that is not accessible for children.
3. Cover the table saw to protect it from dust and other contamination.
Transport
CAUTION!
Risk of injury!
Improper handling may pose a risk of injury.
− The table saw is very heavy. Have a second person help you transport the
table saw.
− Completely disassemble the table saw before transporting it.
− Secure the table saw to prevent it from slipping, shocks and vibration when
transporting it in a vehicle.
− If possible, use the original packaging for transport.
To Next Page
Loading...
Need help?
General
