GB
IRE
0044 151 649 1500
0044 1890 946 244
GB IRE
• Modifications to the table saw;
• Repair of the table saw by parties other than the manufacturer or a qualified
professional;
• Use of the table saw for commercial or industrial applications;
• Operation or maintenance of the table saw by persons not familiar with how to
handle the table saw and/or who are not aware of the related risks.
Residual risks
Despite proper use, inconspicuous residual risks cannot be completely ruled out.
The following risks may arise due to the nature of the table saw:
• Touching the exposed areas of the saw blade.
• Reaching into the rotating saw blade (cut injury).
• Kickback of the work piece and parts of the work piece if used improperly.
• Saw blade breaks.
• Projection of defective hard metal parts of the saw blade.
• Hearing loss in the event of failure to use the required ear protection.
• Damage to the eyes if the required safety goggles are not used.
• Injury to health if the required dust mask is not used.
• Emission of wood dust that is harmful to health if used in enclosed spaces.
Safety instructions
ATTENTION! When using power tools, the following basic safety measures must be
taken in order to provide protection against electric shocks, risk of injury and fire.
Read all these notes before using this power tool and keep the safety instructions in a
safe place.
Working safely
1. Keep work area clean and well lit.
• Disorganisation in your work area poses a risk of accident.
2. Take any environmental factors into account.
• Do not expose the power tools to rain.
• Do not operate the power tools in wet or damp rooms.
• Ensure that the work area is well lit.
• Do not use the power tools if there is a risk of fire or explosion.
To Next Page
Loading...
Need help?
General
