PODD – Installation, Operation and Maintenance Manual
A l e n c o n S y s t e m s L L C - P a g e | 18
3. Finally, secure the PODD in place by placing the screws into the stuct channel nuts.
Figure 13: Screw placement in struct channel nuts
7.3 Gounding
The external ground lug is found next to the three RJ45 connectors on the bottom of the
PODD. The ground lug can be loosened and tightened with a standard flathead
screwdriver. This MUST be connected to Earth ground. Not properly grounding the PODD
can cause the PODD to malfunction and be damaged.
Figure 14: Ground lug placement
To Next Page
Loading...