7
On (when Type is set to CC Toggle): The pad will send this value when you press it to turn it on. Click it and enter a
number (0–127).
Off (when Type is set to CC Toggle): The pad will send this value when you press it to turn it off. Click it and enter a
number (0–127).
Press (when Type is set to CC Momentary): The pad will send this value when you press and hold it. Click it and
enter a number (0–127).
Release (when Type is set to CC Momentary): The pad will send this value when you release it. Click it and enter a
number (0–127).
Program (when Type is set to Program Change): The pad will send this Program Change number when you press
it. Click it and enter a number (0–127).
LSB (when Type is set to Program Change): The pad will send this Bank LSB (Least Significant Byte) number when
you press it. Click it and enter a number (0–127).
MSB (when Type is set to Program Change):
The pad will send this Bank MSB (Most Significant Byte) number when
you press it. Click it and enter a number (0–127).
Colors
You can assign up to 4 colors to each pad. Click each Pad Color menu and select a color: LED Off, Chartreuse,
Green, Aquamarine, Cyan, Azure, Blue, Violet, Magenta, Rose, Red, Orange, Yellow, or White.
When Type is set to Note, the Colors are assigned according to the following:
• Color 1: The color of the pad when it is inactive.
• Color 2: The color of the pad when it is triggered with a velocity from 1–63.
• Color 3: The color of the pad when it is triggered with a velocity from 64–95.
• Color 4: The color of the pad when it is triggered with a velocity from 96–127.
When the Type is set to CC Toggle, CC Momentary, Program Change, or Panic, only Color 1 and Color 2 are
assigned according to the following:
• Color 1: The color of the pad when it is off, released, or inactive.
• Color 2: The color of the pad when it is on, pressed, or active.
To Next Page
Loading...
Need help?
General
