Alesis Vortex Wireless 2 - Faders Configuration

8
Faders
Click the Faders tab to set the MIDI assignments for Vortex Wireless 2's Faders. Click the left or right arrows on the
sides of the window to switch between viewing Fader 1–4 and Fader 5–8.
MIDI Channel: The fader will send its MIDI messages over this channel. Click this menu and select Channel 1 –
Channel 16.
CC #: The fader will send its MIDI messages using this CC number. Click it and enter a number (0–127).
Min: This will be the lowest value that the fader can send. Click it and enter a number (0–127).
Max: This will be the highest value that the fader can send. Click it and enter a number (0–127).