Operating the monitor | 67
When the monitor is turned on after 20 hours of cumulative usage, the Pixe
l
Refresh function runs automatically and notifies you with the following message:
Select Yes, and the refresh process will run automatically after the monitor is
turned off. The process takes approximately 6 to 8 minutes to complete.
When Panel Ref
resh is selected or the cumulative usage time of the monitor is
more than 1500 hours, the following message appears:
Select Proceed, and the refresh process will run automatically. The process takes
approximately an hour to complete.
If you press the power button during the process of running Pi
xel Refresh or
Panel Refresh, the following message appears:
To Next Page
Loading...
