66 | Operating the monitor
You will see the following message before the DDC/CI func
tion is disabled:
When Pixel Refresh is selected, the following message appears:
Once you select Yes, the monitor will be turned off and the refresh process will
run automatically. The process takes approximately 6 to 8 minutes to complete.
When the monitor is turned on after 4 hours of cumulative usage, the Pixe
l
Refresh function runs automatically and notifies you with the following message:
Select Yes, and the refresh process will run automatically after the monitor is
turned off. The process takes approximately 6 to 8 minutes to complete.
To Next Page
Loading...
