Alienware Command Center (AWCC) | 21
Updating the mouse firmware manually
1. Go to www.dell.com/support and search for AW720M.
2. From the Drivers & Downloads tab, download AW720M Mouse FW
update tool.
3. Connect your mouse to your computer through the USB cable.
4. Open the downloaded AW720M Mouse FW update tool le.
5. Click on the Update Mouse button. Once the rmware update is
complete, the “Update Complete! OK” message is displayed.
6. Close the window.
NOTE: Disconnecting the USB cable from the computer, closing the
AWCC software, or shut down of computer during firmware update
may damage the mouse.
Updating USB wireless dongle firmware manually
1. Go to www.dell.com/support and search for AW720M.
2. From the Drivers & Downloads tab, download AW720M Dongle FW
update tool.
3. Connect your mouse to your computer through 2.4GHz Wireless mode.
4. Open the downloaded AW720M Dongle FW update tool le.
5. Click on the Update Dongle button. Once the rmware update is
complete, the “Update Complete! OK” message is displayed.
6. Close the window.
NOTE: Disconnecting the USB wireless dongle, closing the AWCC
software, or shut down of computer during firmware update may
damage the USB wireless dongle.
To Next Page
Loading...
