14
MOTOR DRIVEN OIL FIRED CLEANERS
OIL BATH WATER PUMP:
Oil Level - check and add as needed per PUMP
SERVICE insert.
Oil Change- drain and refill per PUMP SERVICE
insert.
CAUTION: Used oil must be disposed into a n
enviromental safe container and brought to an oil
recycling center.
Oil contamination- Milky color indicates water.
HOSES:
Blistering, Loose Covering
Abrasion of cover exposing reinforcement.
Cuts exposing reinforcement.
BELTS:
Cracks or fraying
Belt Tension- For correct tension, see MACHINE
MAINTENANCE insert.
FILTER-WATER:
Check water inlet hose screen for debris
Check float tank screen for debris.
LEAKS:
Check for water and buildup of scale at pipe
connections.
FUEL:
Adequate fuel supply.
FILTER-FUEL:
If contaminats are present see FUEL FILTER
insert.
Remove and Replace fuel filter per FUEL FILTER
insert.
SCREEN-FUELPUMP:
Check fuel pump screen for debris see OIL
BURNER MAINTENANCE insert.
BURNER Nozzle:
Replace nozzle as specified in BURNER section of
MODEL SPECIFICATIONS or BURNER ASSEMBLY
insert.
GUARDS AND SHIELDS:
Check that all guards and sheilds are in place and
secure.
PUMP MOTOR WITH GREASE FITTINGS:
Remove drain plug. Use 1 or 2 full strokes of shell
“DOBLIUM RB”, Cheveron”SR1 No.2” or Texaco
“PREMIUM RB”. Operate for 20 minutes and replace
drain plug.
FREEZING TEMPERATURES:
Freezing temperatures break coils and water
pumps. See STORAGE in the MACHINE
MAINTENANCE section for cold weather
instructions.
MACHINE MAINTENANCE SCHEDULE
Electric Driven Oil Fired Cleaners
EACH HR AFTER FIRST EVERY EVERY EVERY
DAILY 8 HRS 50 HRS 50HRS 100 HRS 500 HRS YEARLY
05-26-06 Z08-02812
To Next Page
Loading...
