ALLEN&HEATH 34 AP10733_1_XONE:PX5 User Guide
MIDI CHANNEL CHANGE
1
The Xone:PX5 DJ Mixer default MIDI Channel is 16.
You can change MIDI channel by holding down the FX SELECT control
to enter the CONFIG menu.
2
Select CHANNEL and press the FX SELECT control.
This will display the current MIDI Channel.
Press the FX SELECT control to highlight current MIDI Channel.
Rotate the FX SELECT control to change the MIDI Channel.
3
Press FX SELECT to confirm the new MIDI Channel selection.
4
Rotate the FX SELECT control to scroll down to EXIT.
Press the FX SELECT control to exit the CHANNEL menu.
5
Rotate the FX SELECT control to scroll down to EXIT.
Press the FX SELECT control to exit the CONFIG menu.
NOTE:
MIDI Channel will remain set to the last user selected channel when
power to the mixer is switched OFF.
If no change has been made in the CONFIG menu, the mixer powers
ON set to default MIDI Channel 16.
To Next Page
Loading...
Need help?
General
