POINT I/O 4 Channel IO-Link Master Module 17
Publication 1734-IN043A-EN-E - September 2015
Specifications
General Specifications
Attribute Value
Number of inputs 4 single-ended, non-mutual isolated, configurable
Number of outputs
Communication rate, IO-Link 4.8 kB; 38.4 kB; 230.4 kB
Device cable length, IO-Link, max 20 m
Terminal base screw torque 0.8 Nm (7 lb-in.)
Module location 1734-TB, 1734-TBS, 1734-TB3, 1734-TB3S, 1734-TOP, 1734-TOPS,
1734-TOP3, or 1734-TOP3S wiring base assembly
POINTBus current, max 100 mA @ 5V DC
Power dissipation, max 1.5 W @ 28.8V DC
Thermal dissipation, max 5.12 BTU/hr @ 28.8V DC
Isolation voltage 50V (continuous), Basic Insulation Type
Tested at 2121V DC for 60 s, field-side to system. No isolation
between individual channels.
Field power bus supply, nom 24V DC
Field power bus supply, min 19.2V DC
Field power bus supply, max 28.8V DC
Indicators 1 green/red – module status indicator
1 green/red – network status indicator
4 yellow – channel status indicators
4 green – IO-Link status indicators
Wiring category
(1)
(1)
Use this conductor category information for planning conductor routing as described in Industrial Automation Wiring
and Grounding Guidelines, publication 1770-4.1
.
2 – on signal ports
Wire size 0.25...2.5 mm
2
(22...14 AWG) solid or stranded copper wire rated at
75 °C (167 °F), or greater. 1.2 mm (3/64 in.) insulation max
Wire type Copper
Dimensions, approx., HxWxD 56 x 12 x 75.5 mm
(2.21 x 0.47 x 2.97 in.)
Weight, approx. 36 g (1.27 oz)
Enclosure type rating None (open-style)
Keyswitch position 2
To Next Page
Loading...
