Allen-Bradley 1734-AENT User Manual

Installation Instructions
1734 POINT I/O EtherNet/IP Adapter
Catalog number 1734-AENT, Series B
Table of Contents
Topic Page
Important User Information 2
Environment and Enclosure 3
Preventing Electrostatic Discharge 3
Additional Resources 4
North American Hazardous Location Approval 5
European Hazardous Location Approval 6
About The Adapter 7
Before You Begin 8
Firmware Backward Compatibility 8
Understand Messaging 8
Configure Autobaud 8
Install the Adapter 9
Set the Network Address 11
Replace The Adapter 13
Wire The Adapter 15
Interpret Status Indicators 17
Specifications 19

Allen-Bradley 1734-AENT Specifications

General

Product Type	EtherNet/IP Adapter
Network Protocol	EtherNet/IP
Enclosure Type Rating	None (open-style)
Storage Temperature	-40 to 85 °C (-40 to 185 °F)
Housing Material	Plastic
Operating Temperature	0 to 55 °C (32 to 131 °F)
Current Draw @ 24V DC	100 mA maximum
Network Address	Configurable via software
Ports	1 Ethernet port

Summary

Important User Information

Environment and Enclosure

Preventing Electrostatic Discharge

Guidelines to prevent internal damage and ensure normal operation when handling sensitive equipment.

Additional Resources

North American Hazardous Location Approval

European Hazardous Location Approval

About The Adapter

1734-AENT Adapter Series B Overview

Details the 1734-AENT adapter, a communications adapter for POINT I/O modules.

Before You Begin

Firmware Backward Compatibility

Compatibility requirements for 1734-AENT Add-on Profiles with RSLogix 5000 and specific bridge modules.

Understand Messaging

How the 1734-AENT adapter handles Class 3 (Explicit Message) requests and responds to timeouts.

Configure Autobaud

Procedure for setting I/O modules to autobaud before reusing them with the adapter.

Install the Adapter

Mounting on DIN Rail

Instructions for mounting the 1734-AENT adapter module vertically onto a standard IEC DIN rail.

Set the Network Address

Replace The Adapter

Wire The Adapter

Interpret Status Indicators

Specifications

Certifications