Rockwell Automation Publication 1734-UM013N-EN-P - September 2017 23
POINT Guard I/O Overview Chapter 1
For safety system requirements, including information on the safety network
number (SNN), verifying the safety signature, functional verification test
intervals, system reaction time, and PFD/PFH calculations, refer to the following
publications.
You must read, understand, and fulfill the requirements that are detailed in these
publications before operating a safety system that uses POINT Guard I/O
modules.
For safety requirements in: See:
GuardLogix controller systems GuardLogix 5570 Controller Systems Safety Reference
Manual, publication 1756-RM099
SmartGuard 600 controller systems SmartGuard 600 Controllers Safety Reference Manual,
publication 1752-RM001
To Next Page
Loading...
