Allen-Bradley 1734-OB8S User Manual

132 Rockwell Automation Publication 1734-UM013N-EN-P - September 2017
Chapter 6 Configure the Module for a SmartGuard Controller
Complete the Set Up of the SmartGuard Controller
1. From the 1752-L24BBB dialog box, click Apply and then OK to accept
the connection.
2. Place RSNetWorx from DeviceNet software back into Online mode.
a. If you see this dialog box, click Yes to save changes.
b. Click OK to upload or download device information.
You see the following nodes after the browse.

Allen-Bradley 1734-OB8S Specifications

General

Brand	Allen-Bradley
Model	1734-OB8S
Category	Control Unit
Language	English