Need help?Do you have a question about the Allen-Bradley 1734-OB8S and is the answer not in the manual?
General| Manufacturer | Allen-Bradley |
|---|---|
| Product Type | Output Module |
| Output Type | Sourcing |
| Number of Outputs | 8 |
| Voltage Category | 24V DC |
| Communication Interface | POINTBus |
| Operating Temperature | -20 to 60 °C |
| Housing Material | Plastic |
| Module Type | Digital Output |
| Isolation Voltage | 50V |
| Operating Voltage | 20.4-26.4V DC |
| Current Output | 0.5A per point, 4A per module |
The primary manual for Point Guard I/O Safety Modules.
Essential safety warnings and instructions for using the modules.
Guidance on determining if the product is suitable for a specific application.
Essential precautions to ensure proper and safe operation of the modules.
Defines the safe states for digital and analog POINT Guard I/O modules.
Details on using safety digital inputs with the 1734-IB8S module.
Information on configuring and using safety analog inputs.
Details on configuring and using safety digital outputs.
Important precautions to follow during module installation.
Initial steps to set up the module using Logix Designer.
Steps to add and configure safety digital output modules.
Procedure to configure safety input connections.
Steps to add and configure safety analog input modules.
Details on configuring analog input channel operations.
Recommended steps to save and download module configuration.
Steps to add and configure safety digital input modules.
Steps to configure the module for tachometer operation.
Steps for configuring POINT Guard I/O modules.
Steps to verify the DeviceNet safety configuration.
Procedure for replacing modules in an EtherNet/IP system.
Using message instructions to get diagnostic status.
Specific safety digital input module specifications.
Specific safety analog input module specifications.
Specific safety digital output module specifications.
To Next Page
