Allen-Bradley ControlNet PLC-5 - Processor and Cable Selection Guide; Processor Keying and Location; Ladder Messaging and Multicast Features; Network Access Port (NAP) and Node Definition

Publication 1785-UM022B-EN-P - February 2002
Index 5
locating additional information 1-1
removing the processor from the chassis
1-13
selecting cables
ControlNet cables 1-23
DH+ programming 1-23
remote I/O 1-23
serial 1-22
selecting the ControlNet network
address
1-12
selecting the DH+ station address of
Channel 1A
1-11
setting the I/O chassis backplane
switches
1-9
setting the I/O chassis configuration plug
1-10
specifying the serial interface of Channel
0
1-12
instructions
ControlNet I/O Transfer (CIO)
2-6, C-1
how to use 4-3
when to use 2-20
,
2-35
ControlNet Immediate Data Input (IDI)
2-9, C-2
how to use 4-6
ControlNet Immediate Data Output (IDO)
2-9, C-2
how to use 4-6
ControlNet Message (MSG)
how to use 4-1
Immediate Input (IIN)
2-9
Immediate Output (IOT) 2-9
Message (MSG) 2-7
how to use C-1
when to use 2-21
IOT
2-9
K
keeper
definition
P-2
keeper signature
verification
3-4
keyswitch
location of
on PLC-5/20C 1-3
on PLC-5/40C 1-4
L
ladder rung messaging 2-4
link
definition of
P-2
M
major fault 200 and 201 4-9
major fault codes E-1
map table 2-16
maptable entries 2-16
maptable entry P-2
memory card type
using status file to determine
B-14
memory module space 1-3, 1-4
merge-save functionality 3-5
Message instructions 2-4, 2-7, 4-1, C-1
monitoring ControlNet system 5-1
MSGs 2-4
multicast 2-14
multicast inputs 2-14
multicast outputs 2-14
N
NAP P-2
Network Access Port
definition of
P-2
network address
definition of
P-2
network examples 2-32
Network Update Interval 2-5
definition of P-2
Network Update Time
definition of
P-3
node
definition of
P-3
non-discrete I/O data transfer P-3, 2-4
non-discrete I/O data transfer mapping
2-20
non-redundant media 1-17
NUI P-2, 2-5
NUT P-3
O
Option to Close Communication 4-3
owner
definition of
P-3
AB Drives