Rockwell Automation Publication 842E-UM001C-EN-P - September 2016 9
Chapter 1
Safety
This chapter deals with your own safety and the safety of the equipment
operators.
Read this chapter carefully before working with the 842E EtherNet/IP encoder
or the machine or system in which the 842E EtherNet/IP encoder is used.
Authorized Personnel
The following qualifications are necessary for the various tasks:
Correct Use
The 842E EtherNet/IP Absolute Encoder is an instrument that is
manufactured in accordance with recognized industrial regulations. It also
meets the quality requirements as per ISO 9001:2008 and of an environment
management system as per ISO 14_001:2009.
An encoder is a device for mounting that cannot be used independently of its
foreseen function. For this reason, an encoder is not equipped with immediate
safety devices. As per statutory regulations, the operator of the system provides
considerations for the safety of personnel and systems. Due to its design, the
842E EtherNet/IP can only be operated within an EtherNet/IP network. It is
ATTENTION: Only authorized personnel can install, commission, and service
the 842E EtherNet/IP encoder.
Only trained and authorized Rockwell Automation® service personnel can make
repairs to the 842E EtherNet/IP encoder.
Activity Qualification
Mounting Basic technical training
Knowledge of the current safety regulations in the workplace
Electrical installation and
replacement
Practical electrical training
Knowledge of current electrical safety regulations
Knowledge on the use and operation of devices in the related application (for
example, industrial robots, storage, and conveyor technology)
Commissioning, operation, and
configuration
Knowledge on the current safety regulations and the use and operation of
devices in the related application
Knowledge of automation systems (for example, Rockwell Automation®
ControlLogix® controller)
Knowledge of EtherNet/IP
Knowledge of the usage of automation software (for example, Rockwell
Automation RSLogix™)
To Next Page
Loading...
