Allen-Bradley EtherNet/IP 842E-MIP2BA User Manual

EtherNet/IP™Absolute Encoder
Catalog Numbers 842E-SIP1BA. 842E-SIP2BA, 842E-SIP3BA, 842E-SIP4BA, 842E-SIP5BA, 842E-SIP6BA, 842E-SIP7BA,
842E-SIP8BA, 842E-SIP9BA, 842E-SIP10BA, 842E-SIP11BA, 842E-SIP12BA, 842E-MIP1BA, 842E-MIP2BA, 842E-MIP3BA,
842E-MIP4BA, 842E-MIP5BA, 842E-MIP6BA, 842E-MIP7BA, 842E-MIP8BA, 842E-MIP9BA, 842E-MIP10BA, 842E-MIP11BA,
842E-MIP12BA
User Manual
Original Instructions

Allen-Bradley EtherNet/IP 842E-MIP2BA Specifications

General

Brand	Allen-Bradley
Model	EtherNet/IP 842E-MIP2BA
Category	Media Converter
Language	English

Summary

Safety Guidelines

Authorized Personnel Requirements

General Safety and Protective Measures

Provides critical safety guidelines and precautions for installation and operation.

Encoder Overview and Features

842E Encoder Features and Specifications

Lists key technical features and specifications of the 842E EtherNet/IP encoder.

Configurable Encoder Parameters

Scalable Encoder Resolution

Special Encoder Features

Installation Procedures

Mechanical Installation

Covers the mechanical aspects of installing the encoder.

Mounting with Solid Shaft

Provides step-by-step instructions for mounting the encoder with a solid shaft.

Mounting with Hollow Shaft

Details the procedure for mounting the encoder with a hollow shaft.

Electrical Wiring and Connections

Provides guidance on connecting power and Ethernet cables.

Pin Assignments

Details the pinout for voltage supply and Ethernet connections.

Network Address Switches Setup

Describes using switches to set the encoder's IP address.

Encoder Configuration

Setting the IP Address

Outlines methods for assigning an IP address to the encoder.

IP Address Assignment via Switches

Step-by-step guide to setting IP address using DIP switches.

IP Address Assignment via BOOTP/DHCP

Explains automatic IP assignment via BOOTP/DHCP.

RSLogix 5000 Configuration

Encoder Configuration Process

General overview of encoder configuration using RSLogix 5000 software.

Installing RSLogix 5000 Add-on Profile

Guides installation of the encoder's Add-on Profile for RSLogix 5000.

General Tab Configuration

Details settings on the General tab for module configuration.

IP Address Configuration

Explains how to set the IP address within module properties.

Module Definition Settings

Connection Tab Settings

Configuration Tab Details

Internet Protocol Tab Settings

Default Encoder Configuration

Preset Function Operation

RSLogix 5000 Controller Tags

Diagnostics and Troubleshooting

Encoder Status Indicators

Explains the LED indicators on the encoder for status feedback.

Warnings, Alarms, and Errors

How to retrieve and interpret warnings, alarms, and errors.

Supported Warnings

Supported Alarms

Sensor Error Codes

RSLogix 5000 Sample Code

Linear Scaling Example

Installing Your Project

Set Preset Encoder Value via Explicit Message

Details configuring explicit messages to set the encoder's preset value.

Read Preset Encoder Value via Explicit Message

Explains how to read the preset value using explicit messages.

Obtain Encoder Runtime via Explicit Message

Demonstrates reading encoder runtime using explicit messages.