70 Publication 1756-PM004C-EN-P - October 2009
Chapter 4 Data Access Control
‘Go To’ Search Menu
The external access setting of an alias tag can only be changed through its base
tag. The ‘Go To’ option on the Search menu of the RSLogix 5000
programming software is a convenient way to find the base tag among all the
cross-reference records.
Follow these steps to locate a base tag.
1. With the Tag Editor window open, from the RSLogix 5000 Search
menu, select the desired alias tag and choose Go To.
The Go To window appears.
2. In the ‘Go to what column’, choose Base Tag.
The box will display the target of the alias tag. If there is an alias chain,
all alias tags in this chain will display in a pull-down list in the Go To
column.
3. From the Go To pull-down menu, choose a target of the alias tag.
4. Click Go To.
The target is located with a black box around it.
To Next Page
Loading...
Need help?
General
