Allen-Bradley Logix5000 Programming Manual

Publication 1756-PM004C-EN-P - October 2009 81
Data Access Control Chapter 4
Configure a Constant in the Tag Properties Dialog Box
Follow these steps to designate a tag as a constant on the Tag Properties
dialog box.
1. On the Tag Editor window, right-click a tag and choose Edit (tag name)
Properties.
The Tag Properties dialog box appears.
2. From the Type pull-down menu, choose a tag type.
3. Check Constant.
4. Click OK.
See
Constant Checkbox Availability on page 84 for considerations.

Allen-Bradley Logix5000 Specifications

General

Brand	Allen-Bradley
Model	Logix5000
Category	Controller
Language	English