80 Publication 1756-PM004C-EN-P - October 2009
Chapter 4 Data Access Control
Configure Constant Tags
This section describes the various ways a constant attribute can be configured.
Set Up a Constant in the New Tag Dialog Box
Follow these steps to configure a tag as a constant on the New Tag dialog box.
1. On the Controller Organizer, right-click Controller Tags and choose
New Tag.
The New Tag Dialog Box appears.
2. From the Type pull-down menu, choose a tag type.
3. Check Constant.
4. Click OK.
See
Constant Checkbox Availability
on
page 84
for considerations.
To Next Page
Loading...
