62 Publication 1756-PM004C-EN-P - October 2009
Chapter 3 Force I/O
Remove an Individual Force
1. Open the routine that contains the force that you want to remove.
2. What is the language of the routine?
3. Right-click a tag that has the force and choose Monitor.
If necessary, expand the tag to show the value that is forced, for
example, BOOL value of a DINT tag.
4. Right-click a tag or element that has the force and choose
Remove Force.
Disable All I/O Forces
To disable, choose Logic>I/O Forcing>Disable All I/O Forces. Click Yes
to confirm.
Remove All I/O Forces
To remove, choose Logic>I/O Forcing>Remove All I/O Forces. Click Yes
to confirm.
If you remove an individual force, forces remain in the
enabled state and any new force immediately takes effect.
Before you remove a force, determine how the change will
effect your machine or process and keep personnel away
from the machine area.
If Then
SFC Go to step 4
.
Ladder logic Go to step 4
.
Function block Go to step 3
.
Structured text Go to step 3
.
To Next Page
Loading...
