Allen-Bradley Logix5000 User Manual

Rockwell Automation Publication ENET-UM004B-EN-P - November 2015 49
Add an EtherNet/IP Communication Module to a Controller Project Chapter 4
15. Click the Internet Protocol category.
If needed, you can set Internet Protocol properties such as:
• Domain Name
• Host Name
• Gateway Address
• Primary and secondary DNS Server Addresses.
f. On the Module Properties dialog box, click OK.
g. Save the project.
IMPORTANT
If you try to change the IP Address on this page, the following alert appears:

Allen-Bradley Logix5000 Specifications

General

Brand	Allen-Bradley
Model	Logix5000
Category	Controller
Language	English