Allen-Bradley MicroLogix 1100 User Manuals

6 Rockwell Automation Publication 1763-UM002E-EN-P - October 2015
Chapter 2 Use Data Views to Access Controller Data
Change an Access Group
Each data view contains a group of files that you want to monitor. Each
MicroLogix 1100 controller can support multiple data views. One browser
supports one data view, so if you want to look at many data views, you need to run
a corresponding number of browsers.
You change an access group from the Data Views → New Data View page.
1. From the Access Group pull-down menu for the given data table file,
choose the access group type you wish to assign. Choose from:
• Administrator (all access)
• Write (read/write access only)
• Read (read access only)
2. Choose Administrator, Write, or Read from the Access Group pull-down
menu to change a file's access group.
3. Click Apply to change an access group for the data table file you
specified.

Allen-Bradley MicroLogix 1100 Specifications

General

Processor	32-bit
Programming Software	RSLogix 500
Mounting	DIN rail or panel mount
Power Supply	24V DC
Type	Compact PLC
Digital Inputs	12
Digital Outputs	8
Analog Inputs	4 (depending on model)
Analog Outputs	Optional with expansion module
Programming Language	Ladder Logic
Operating Temperature	0 to 55 °C (32 to 131 °F)
Series	MicroLogix