Rockwell Automation Publication 1763-UM002E-EN-P - October 2015 11
Chapter
3
Manage User Accounts and Access Levels
How to Use This Chapter
This chapter describes how to configure user access levels to different information
on the module.
By assigning user accounts with different access levels, you can manage which
users have access to view network configuration or have access to view and change
data views.
Several pages on the MicroLogix 1100 controller, such as diagnostics pages and
data views pages, have default access protection. Before accessing these pages, you
must authenticate your access by entering a user name and password. The module
displays the log-in box when you access these web pages.
The default user name is administrator with password 'ml1100' or guest with
password 'guest'
.
User Accounts and
Privilege Classes
The MicroLogix 1100 controller supports multiple user accounts, each with a
user name and password. Each user account is configured for one of these access
levels:
• Administrator (all access)
• Write (read/write access only)
• Read (read access only)
Topic
Page
User Accounts and Privilege Classes
11
Configure Access Limits for Web Pages
12
Create User Accounts
13
Recover with Unknown Password
14
Once authenticated, you do not have to re-enter a user name or
password when accessing subsequent pages. You must close
your browser to log out.
It is strongly recommended that you change the password for
the default Administrator account.
For MicroLogix 1100 FRN 15.0 or later, the password 'ml1100' is
no longer accepted when changing or after changing the
password for the default Administrator account.
To Next Page
Loading...
Need help?
General
