Rockwell Automation Publication 1763-UM002E-EN-P - October 2015 13
Manage User Accounts and Access Levels Chapter 3
Create User Accounts
You need Administrator access to create and modify user accounts. You can create
as many as 10 individual accounts. You manage accounts from the Administrative
Settings → User Management → Edit Users page.
A user account with a specific privilege can access the Data corresponding to the
specific access level, that is, a user account with Read access level can not access
the Data belonging to Write or Administrator acess group. The following screen,
which shows only Read Access Group, appears when you log in with the guest
account.
In this field Do this
User ID Enter the user name for the account.
20 characters maximum
Can contain these characters: A…Z, a…z, 0…9, underscore (_), and
dash (-)
Group Select Administrator, Write, or Read access for the user account
Password Enter the password for the account.
10 characters maximum
Confirm Password Re-enter the same password for the account.
If you use Internet Explorer, the number of characters allowed
for a user ID or password depends on how many characters “fit
in the box.” Larger characters (such as “W”) take more room
and reduce the total number of allowed characters.
To Next Page
Loading...
Need help?
General
