Publication 1762-RM001C-EN-P
System Status File C-19
RTC Hours
This address is duplicated in the Real-Time Clock Function File at
RTC:0.HR
.
See Real-Time Clock Function File on page 3-3 for more
information.
RTC Minutes
This address is duplicated in the Real-Time Clock Function File at
RTC:0.MIN
.
See Real-Time Clock Function File on page 3-3 for more
information.
RTC Seconds
This address is duplicated in the Real-Time Clock Function File at
RTC:0.SEC
.
See Real-Time Clock Function File on page 3-3 for more
information.
RTC Day of Week
This address is duplicated in the Real-Time Clock Function File at
RTC:0.DOW
.
See Real-Time Clock Function File on page 3-3 for more
information.
Address
(1)
(1) This word can only be accessed via ladder logic. It cannot be accessed via communications (such as a Message
instruction from another device).
Data Format Range Type User Program Access
S:40 word 0 to 23 status read only
Address
(1)
(1) This word can only be accessed via ladder logic. It cannot be accessed via communications (such as a Message
instruction from another device).
Data Format Range Type User Program Access
S:41 word 0 to 59 status read only
Address
(1)
(1) This word can only be accessed via ladder logic. It cannot be accessed via communications (such as a Message
instruction from another device).
Data Format Range Type User Program Access
S:42 word 0 to 59 status read only
Address
(1)
(1) This word can only be accessed via ladder logic. It cannot be accessed via communications (such as a Message
instruction from another device).
Data Format Range Type User Program Access
S:53 word 0 to 6 status read only
To Next Page
Loading...
Need help?
General
