Name: Allen-Bradley PanelView Plus 1000
Brand: Allen-Bradley
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Publication 2711P-UM001A-EN-P

3-4 Applying Power

• Insert a thin probe into the hole marked DEFAULT and press the

switch, then;

• Insert the probe into the hole marked RESET and press the

switch. The system will restart immediately into the Safe Mode.

Startup Sequence

After a reset, the PanelView Plus performs a series of startup tests and

then either:

• runs the .MER application currently loaded in the terminal

• enters PanelView Plus configuration mode

The action that occurs depends on what startup options are

configured for your PanelView Plus terminal.

ATTENTION

Use a nonconducting object to press the RESET and

DEFAULT switch. Do not use a conducting object

such as a paper clip or you may damage the

terminal. Do not use the tip of a pencil; graphite

may damage the terminal.

Other manuals for Allen-Bradley PanelView Plus 1000

Questions and Answers:

Need help?

Do you have a question about the Allen-Bradley PanelView Plus 1000 and is the answer not in the manual?

General