Publication 2711-UM014B-EN-P
Using a Memory Card 4-3
The Memory Card Retainer protects against:
• electrical shock from loose high voltage wires in an electrical
enclosure per UL508
• electrostatic discharge (ESD) up to 15KV
• accidental removal or ejection of the memory card from the card
slot.
ATTENTION
!
When permanently installing a memory card in
an electrical enclosure, the memory card
retainer must be used to avoid accidental
contact of high voltage leads to metal surfaces
on the card. Failure to use the retainer could
result in physical injury or damage to the
terminal.
ATTENTION
!
Without the memory card retainer installed,
electrostatic discharge could reset or damage
the PanelView terminal.
ATTENTION
!
Accidental removal of an ATA flash card from
the card slot could result in damage to the
card.
To Next Page
Loading...
Need help?
General
