Publication 2711-UM014B-EN-P
4-6 Using a Memory Card
Loading Application
on a Memory Card
The steps below show how to load an application in the terminal onto
a memory card.
To transfer an application to a memory card:
1. Insert the memory card into the card slot of the terminal.
2. Open the Configuration Mode menu by simultaneously pressing
the Left and Right arrows (on keypad terminals), or the
Goto Config. Screen button (on touch screen terminals).
3. Select Memory Card and press the Enter
↵ key.
ATTENTION
!
Explosion Hazard - Do not install or remove memory
card unless power has been switched off or the area
is known to be non-hazardous.
Function keys do not
appear on touch
screen terminals.
To Next Page
Loading...
Need help?
General
