Allen-Bradley PV300 Micro - Using a Memory Card; Chapter Objectives; Supported Memory Cards

1 Publication 2711-UM014B-EN-P
Chapter 4
Using a Memory Card
Chapter Objectives
This chapter describes:
• supported memory cards
• using the memory card retainer
• loading application from a memory card
• loading application on a memory card
• storing font files on a memory card
• removing a memory card
Supported Memory Cards
Memory cards are available to transfer application files to/from a
PanelView terminal with a memory card slot. The PanelView 300
Micro does not support a memory card.
PanelView terminals running firmware 3.0 (or later) and computers
with an ATA card drive support the following cards.
• 4M flash ATA card (Catalog No. 2711-NM24)
• 8M flash ATA card (Catalog No. 2711-NM28)
• 16M flash ATA card (Catalog No. 2711-NM216)
All PanelView terminals and computers with a DataBook TMB240 or
TMB250 card drive support these cards:
• 256K flash memory card (Catalog No. 2711-NM11)
• 1M flash memory card (Catalog No. 2711-NM12)
• 2M flash memory card (Catalog No. 2711-NM13)
• 4M flash memory card (Catalog No. 2711-NM14)
• 10M flash memory card (Catalog No. 2711-NM15)