PrefaceP–2
Publication
1747-10.4
Related Documentation
The table below provides a listing of publications that contain
important information about Allen-Bradley Small Logic Controllers
and their installation and application. You may want to reference
them while you are installing the SLC 500 controller. (To obtain a
copy of one of these publications, contact your local Allen-Bradley
office or distributor.)
For Read This Document
Document
Number
An overview of the SLC 500 family of products SLC 500 System Overview 1747-2.30
A description on how to install and use your Modular SLC 500
programmable controller
Installation & Operation Manual for Modular
Hardware Style Programmable Controllers
1747-6.2
A reference manual that contains status file data and instruction set
information for the SLC 500 processors and MicroLogix 1000
Controllers.
SLC 500 and MicroLogix 1000 Instruction Set
Reference Manual
1747-6.15
In-depth information on grounding and wiring Allen-Bradley
programmable controllers
Allen-Bradley Programmable Controller Grounding
and Wiring Guidelines
1770-4.1
A description of important differences between solid-state
programmable controller products and hard-wired
electromechanical devices
Application Considerations for Solid-State Controls SGI-1.1
An article on wire sizes and types for grounding electrical
equipment
National Electrical Code
Published by the
National Fire
Protection
Association of
Boston, MA.
A complete listing of current Allen-Bradley documentation,
including ordering instructions. Also indicates whether the
documents are available on CD-ROM or in multiple languages.
Allen-Bradley Publication Index SD499
A glossary of industrial automation terms and abbreviations Allen-Bradley Industrial Automation Glossary AG-7.1
To Next Page
Loading...
Need help?
General
