Allen-Bradley SLC 500

Publication 1747-10.4
Who Should Use this Manual P–1. . . . . . . . . . . . . . . . . . . . . . . . . .
Purpose
of This Manual P–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Related
Documentation P–2. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Conventions
Used in this Manual P–3. . . . . . . . . . . . . . . . . . . . . . .
Allen-Bradley
Support P–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Local
Product Support P–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Technical Product Assistance P–3. . . . . . . . . . . . . . . . . . . . . . . .
Your Questions or Comments on this Manual P–4. . . . . . . . . . . . .
Chapter 1
SLC 5/05 Processors and Ethernet Communication 1–1 . . . . . . . . . .
Passthru
Feature 1–2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SLC 5/05 Performance Considerations 1–2 . . . . . . . . . . . . . . . . . . .
Hardware
Features 1–2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Processor
Status LED Operation 1–3 . . . . . . . . . . . . . . . . . . . . . . . .
Keyswitch
Operation 1–4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RUN
Position 1–4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PROG
Position 1–4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
REM
Position 1–4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2
Required T ools and Equipment 2–1 . . . . . . . . . . . . . . . . . . . . . . . . .
Install
the Power Supply 2–1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Install the Processor
2–3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Apply Power to the Processor
2–4 . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect
the SLC 5/05 and the PC to the Ethernet Network 2–4 . . . . .
Ethernet Network Topology
2–4 . . . . . . . . . . . . . . . . . . . . . . . . . .
Ethernet
Channel 1 8-Pin 10Base-T Connector 2–5 . . . . . . . . . . .
Cables
2–5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Load Y
our Programming Software 2–5 . . . . . . . . . . . . . . . . . . . . . . .
Chapter 3
Configuration Methods 3–1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuration
Using RSLogix500 Programming Software 3–2 . . . . . .
Define
SLC 5/05 Processor and I/O Modules 3–2 . . . . . . . . . . . . .
Create Program and Configure Comms Drivers
3–5 . . . . . . . . . . .
Download
the Program 3–6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switch
to the Ethernet Network and Go ONLINE 3–7 . . . . . . . . . .
Table of Contents
Preface
SLC 5/05 Ethernet Processor
Features
Setting Up the SLC and PC
Hardware
Configuring the Ethernet
Channel for Local